Changes between Version 43 and Version 51 of Documentation/Configuration


Ignore:
Timestamp:
(multiple changes)
Author:
(multiple changes)
Comment:
(multiple changes)

Legend:

Unmodified
Added
Removed
Modified
  • Documentation/Configuration

    v43 v51  
    1 [[TranslatedPages(outdated=Several settings have changed - update needed)]]
    2 [[TOC(depth=1)]]
     1[[TranslatedPages]]
     2[[TOC(depth=3, Documentation/Configuration)]]
    33
    44= Configuration =
     
    99This sheet contains some essential information needed for YAM to work.
    1010
    11 === Minimal configuration ===
    12 `Full Name`
     11'''''Minimal configuration'''''
     12
     13`Real Name`
    1314  Your real name and surname.  Please take care that this field is filled in correctly.  DO NOT use quotation marks in your name.
    1415
     
    2021  Example: jdoe@example.com
    2122
    22 `Mail server`
     23`Server name`
    2324  The Internet address (hostname or IP) of your system's mail server.  This server, which normally is a computer of your ISP (Internet Service Provider), must be capable of working with the POP3/SMTP protocol.
    2425
     
    3637
    3738[[=#FixTimezone]]
    38 === Time zone ===
     39'''''System settings'''''
     40
     41`Charset`
     42
    3943`Timezone`
    4044  The time and date displayed by YAM in the message list is always converted to your local time.  This guarantees correct sorting of messages from all over the world sent out from different time zones.  The time zone is part of the message's date and specifies the difference between local time and Greenwich Mean Time (GMT).
     
    4448  Normally YAM will get the time zone from your Locale settings, thus this selector will be ghosted.
    4549
    46 `Add adjustment for daylight saving time`
    47   This option is to be activated during daylight saving time. By doing so, one hour will be added to the time zone value. YAM automatically changes to/from daylight saving time if the operating system support DST switching (e.g. AmigaOS4) or if a AutoDST tool like SetDST, FACTS or SummertimeGuard is installed. This is indicated by ghosting this checkbox.
    48 
    49   Example: John Doe
    50 
     50-----
    5151== TCP/IP ==
    5252Here you can enter the information needed to actually send email, as well as define additional POP3 accounts.
    53 
    54 === Send mail (SMTP) ===
    55 Apart from the primary SMTP server already defined in the First steps section, you can set up an unlimited number of SMTP servers here; the names appear in the list on the left and clicking on a name brings up the relevant details
    56 on the right. Note that these accounts can be for the same user on a different server, or a different user on the same server. Either way, you can check for new mail with a single mouse click. Click on [New] to insert the data required for a new e-mail account. With [Delete] you can delete accounts.
    57 
    58 `Server`
    59   The Internet address of the system you're sending your mail to. This server, which usually is a computer of your ISP (Internet Service Provider), must be capable of processing the SMTP protocol.
    60 
    61   Example: mail.example.com
    62 
    63 `Port`
    64   The port number of the SMTP service. The standard port is 25 for plain SMTP. In case of using SSL/TLS connections this port may also be 576 or 456.
    65 
    66   Example: 25
    67 
    68 `SMTP server allows 8bit`
    69   Originally only the US-ASCII character set was allowed for use in e-mail, which meant that users were forced to use vowels (e.g., they had to use 'ae' instead of 'ä').  The reason for that was that many servers only processed the first 7 bits and simply cut off the 8th bit, crippling the e-mail while doing so. This problem was solved by introducing the MIME quoted-printable standard, which converts all 'unauthorized' characters to 7 bit before transfer and reconverts them to the original characters on delivery.  Modern mail servers don't have problems with non-US-ASCII characters any more, so messages do not necessarily have to be converted.  If you are absolutely sure that your server supports 8 bit transfers, you can switch this option on and save a few bits when transferring e-mails. The best way to find out if your mail server supports this is to write a message to yourself containing modified vowels and see what happens.
    70 
    71   Example: Yes
    72 
    73 `Use SMTP AUTH`
    74   Enable this if you want to use SMTP Authentication, whereby YAM will request your mail server to use an extra authentication layer as documented in RFC 2554. You will need to fill in another couple of UserID/Password fields in this case. If your SMTP server does not support SMTP AUTH, you will receive an error message when trying to send email. Ask your ISP if in doubt.
    75 
    76   Example: No
    77 
    78 `Username`
    79   When using SMTP AUTH you can insert the user name for the SMTP authentification here. In most cases this will be identical to the username in your e-mail address.  However, there are exceptions, so check the instructions from your ISP (YAM then constructs the full account name in the form <Username>@<server>).
    80 
    81   Example: jdoe
    82 
    83 `Password`
    84   The password which has to be sent to the mail server at login time. You can leave this field empty for security reasons -- if you do, the password will be asked to you whenever you send new mails. Also, remember the password is case sensitive.
    85 
    86   Example: nguz56
    87 
    88 `Use SMTP TLSv1/SSLv3`
    89   Enable this if your SMTP server supports TLSv1/SSLv3 secure connections. If enabled, YAM will connect via the AmiSSL library with the SMTP server and encrypts every transfer.
    90 
    91   Example: No
    9253
    9354[[=#FixPOP3]]
     
    9657on the right. Note that these accounts can be for the same user on a different server, or a different user on the same server. Either way, you can check for new mail with a single mouse click. Click on [New] to insert the data required for a new e-mail account. With [Delete] you can delete accounts.
    9758
     59`Active`
     60  Switch this option on to have the selected POP3 account checked for new mail whenever you use the Get new mail button in the toolbar, or the equivalent item in the "Folder" menu.  If you don't want this email account to be checked automatically, switch this option off and use the menu item Folder/Check single account from the main window instead.
     61
     62  Example: Yes
     63
     64`Description`
     65
    9866`Server`
    9967  The Internet address of the system you're sending your mail to. This server, which usually is a computer of your ISP (Internet Service Provider), must be capable of processing the POP3 protocol.
     
    10270
    10371`Port`
     72
    10473  The port number of the POP3 service. The standard port is 110 for plain POP3. In case of using SSL/TLS connections this port may also be 995.
    10574
    10675  Example: 110
    10776
    108 `Username`
     77`Test connection settings`
     78
     79'''''Security and Authentification'''''
     80
     81`Connection Security`
     82  Activate this option (SSL/TLS) to use SSL based encryption under the TLS protocol as described in RFC 2595.  This adds extra security to prevent the typical eavesdropping and hijacking attacks which POP is commonly subject to, and will use port 995 instead of the usual 110.
     83  The option STARTTLS will force the use of the POP3 STARTTLS  extension, adding another layer of security to the communication, using again port 110.
     84  If your POP3 server doesn't support any of this, you will receive an error message when checking for new mail.  Also, AmiSSL is required.
     85
     86`Authentification`
     87  Normally the Username and the password are transmitted as plain text when connecting to a POP3 server.  Under certain circumstances, this could be a security risk, and for this reason modern POP3 servers support the APOP authentication, which transmits the username and password encrypted with a key which is delivered by the server.  If your POP3 server does not support APOP you'll receive an error message when checking for new mail; in that case, switch this option off. Also note, that if your POP3 server supports TLS/SSL this should be preferred as it also transmits the email content encrypted rather than in plain text.
     88
     89`User name`
    10990  The user name for authentication against the specified POP server.. In most cases this will be identical to the username in your e-mail address.  However, there are exceptions, so check the instructions from your ISP (YAM then constructs the full account name in the form <Username>@<server>).
    11091
     
    11697  Example: nguz56
    11798
    118 `Active`
    119   Switch this option on to have the selected POP3 account checked for new mail whenever you use the Get new mail button in the toolbar, or the equivalent item in the "Folder" menu.  If you don't want this email account to be checked automatically, switch this option off and use the menu item Folder/Check single account from the main window instead.
    120 
    121   Example: Yes
    122 
    123 `Use POP3 TLSv1/SSLv3`
    124   Activate this option to use SSL based encryption under the TLS protocol as described in RFC 2595.  This adds extra security to prevent the typical eavesdropping and hijacking attacks which POP is commonly subject to, and will use port 995 instead of the usual 110.
    125   The with STLS option will force the use of the POP3 STARTTLS  extension, adding another layer of security to the communication, using again port 110.
    126   If your POP3 server doesn't support any of this, you will receive an error message when checking for new mail.  Also, AmiSSL is required.
    127 
    128   Example: Yes
    129 
    130 `Login using APOP`
    131   Normally the Username and the password are transmitted as plain text when connecting to a POP3 server.  Under certain circumstances, this could be a security risk, and for this reason modern POP3 servers support the APOP authentication, which transmits the username and password encrypted with a key which is delivered by the server.  If your POP3 server does not support APOP you'll receive an error message when checking for new mail; in that case, switch this option off. Also note, that if your POP3 server supports TLS/SSL this should be preferred as it also transmits the email content encrypted rather than in plain text.
    132 
    133   Example: No
    134 
    135 `Delete mail on server`
    136   If this option is activated, new mail will be deleted after downloading it from the mail server.  The messages will be deleted only after they have been successfully saved to your computer. If the POP3 account is used by several people, or if you'd like to access your account again later from another computer, this option can be deactivated.
    137 
    138   Example Yes
    139 
    140 [[=#FixNewmail]]
    141 == New mail ==
    142 Controlling the way mail is downloaded.
    143 
    144 === Download ===
     99'''''Message handling'''''
     100
    145101`Pre-selection`
    146102  After establishing a link with the POP3 server, a  preselection window may open showing a list of all new mail in the POP3 mailbox.  This allows you to decide whether to download, delete or leave a message on the server, according to its size, topic or sender. For pre-selection to work properly, the server must support the TOP command which most of them do.
     
    153109  Example: always
    154110
    155 `Size limit`
     111`Check for new mail on startup`
     112
     113`Check for new mail every <n> minutes`
     114  Here you can specify a time interval after which YAM will automatically recheck your mail server for new mail.  To deactivate this option, simply select zero.
     115
     116  Example: 15 minutes
     117
     118`Download messages larger than <n> KB`
    156119  If pre-selection is activated, messages which exceed the size given here will be highlighted.  This way you can avoid downloading messages with huge attachments.  The size is given in kilobytes. If you don't want to use any limit, just insert '0'.
    157120
     
    160123  Example: 100
    161124
    162 `Transfer window`
    163   Here you can decide if you want to see the  transfer window  while receiving or sending mail.  With //automatic// it only opens if you manually initialize the transfer, staying closed while YAM automatically checks for new mail.
    164 
    165   Example: never
    166 
    167 `Avoid duplicates`
    168   If you choose not to have YAM delete the mail on the server after downloading, it will be downloaded again next time YAM gets your mail, so every message will appear twice in your mail folder.  To prevent this, switch the Avoid duplicates option on -- as long as this option is activated, YAM will keep track of all your downloaded messages in the .uidl file and use special commands of the POP3 server to avoid downloading the same message twice. If the POP3 server supports these UIDL commands, this check will be done rather quickly.  If the server doesn't support these commands, YAM will try to read the Message-ID using the TOP command instead of the UIDL commands.  In case the mail server doesn't support any of these commands, this option must be turned off.
    169 
    170   Example: Yes
    171 
    172 `Update message status`
    173   If this option is activated, new messages in the 'Incoming' folder will be marked as 'unread' before downloading new mail.  This way you can instantly recognize the new mail that was downloaded the last time you've fetched mail.
    174 
    175   Example: Yes
    176 
    177 === Automatic operation ===
    178 `Check for new mail every [xx] minutes`
    179   Here you can specify a time interval after which YAM will automatically recheck your mail server for new mail.  To deactivate this option, simply select zero.
    180 
    181   Example: 15 minutes
    182 
    183 `Download large messages`
    184   Whenever new mail is downloaded automatically (every x minutes or using ARexx), the selection window won't pop up since the user is likely to be working with another program at the time, or not in front of the computer at all.  Mails exceeding the size limit won't be downloaded and will remain on the server if this option is not activated.
    185 
    186   Example: No
    187 
    188 === Notification ===
     125`Delete mail on server`
     126  If this option is activated, new mail will be deleted after downloading it from the mail server.  The messages will be deleted only after they have been successfully saved to your computer. If the POP3 account is used by several people, or if you'd like to access your account again later from another computer, this option can be deactivated.
     127
     128  Example Yes
     129
     130`Apply remote filter`
     131  Apply all all defined remote filters when downloading from this server.
     132
     133'''''Default folders'''''
     134
     135`'Incoming' folder`
     136  Allows to set a different folder where mails will be stored after having received them.
     137
     138[[=#FixNewmail]]
     139'''''Notification for new mails'''''
     140
    189141`Requester`
    190142  Once YAM has downloaded new mail, it will display a requester showing the number of new and deleted messages.
     
    192144  Example: Yes
    193145
     146`AmigaOS4.1 notification system`
     147
    194148`Sound`
    195149  Once YAM has downloaded new mail, it will play a sound file.  The datatypes library is used for playing, so the sound file can be of any format (like AIFF or WAVE), as long as you have installed the appropriate datatypes.  Click the small arrow (PLAY symbol) to test the sound.
     
    202156  Example: RX PROGDIR:rexx/Newmail.YAM
    203157
     158=== Send mail (SMTP) ===
     159Apart from the primary SMTP server already defined in the First steps section, you can set up an unlimited number of SMTP servers here; the names appear in the list on the left and clicking on a name brings up the relevant details
     160on the right. Note that these accounts can be for the same user on a different server, or a different user on the same server. Either way, you can check for new mail with a single mouse click. Click on [New] to insert the data required for a new e-mail account. With [Delete] you can delete accounts.
     161
     162`Active`
     163
     164`Description`
     165
     166`Server`
     167  The Internet address of the system you're sending your mail to. This server, which usually is a computer of your ISP (Internet Service Provider), must be capable of processing the SMTP protocol.
     168
     169  Example: mail.example.com
     170
     171`Port`
     172
     173  The port number of the SMTP service. The standard port is 25 for plain SMTP. In case of using SSL/TLS connections this port may also be 576 or 456.
     174
     175  Example: 25
     176
     177`Test connection settings`
     178
     179'''''Security and Authentification'''''
     180
     181`Connection Security`
     182  Enable this if your SMTP server supports TLSv1/SSLv3 secure connections. If enabled, YAM will connect via the AmiSSL library with the SMTP server and encrypts every transfer.
     183
     184  Example: No
     185
     186`Authentification`
     187  Enable this if you want to use SMTP Authentication, whereby YAM will request your mail server to use an extra authentication layer as documented in RFC 2554. You will need to fill in another couple of UserID/Password fields in this case. If your SMTP server does not support SMTP AUTH, you will receive an error message when trying to send email. Ask your ISP if in doubt.
     188
     189  Example: No
     190
     191`Username`
     192  When using SMTP AUTH you can insert the user name for the SMTP authentification here. In most cases this will be identical to the username in your e-mail address.  However, there are exceptions, so check the instructions from your ISP (YAM then constructs the full account name in the form <Username>@<server>).
     193
     194  Example: jdoe
     195
     196`Password`
     197  The password which has to be sent to the mail server at login time. You can leave this field empty for security reasons -- if you do, the password will be asked to you whenever you send new mails. Also, remember the password is case sensitive.
     198
     199  Example: nguz56
     200
     201'''''Options'''''
     202
     203`Server allows 8bit characters`
     204  Originally only the US-ASCII character set was allowed for use in e-mail, which meant that users were forced to use vowels (e.g., they had to use 'ae' instead of 'ä').  The reason for that was that many servers only processed the first 7 bits and simply cut off the 8th bit, crippling the e-mail while doing so. This problem was solved by introducing the MIME quoted-printable standard, which converts all 'unauthorized' characters to 7 bit before transfer and reconverts them to the original characters on delivery.  Modern mail servers don't have problems with non-US-ASCII characters any more, so messages do not necessarily have to be converted.  If you are absolutely sure that your server supports 8 bit transfers, you can switch this option on and save a few bits when transferring e-mails. The best way to find out if your mail server supports this is to write a message to yourself containing modified vowels and see what happens.
     205
     206  Example: Yes
     207
     208'''''Default folders'''''
     209
     210`'Sent' folder`
     211  Allows to set a different folder where mails will be stored after being sent out.
     212
     213-----
     214== Identities ==
     215Manage pultiple identities for composing mails.
     216
     217=== General Settings ===
     218
     219'''''General Settings'''''
     220
     221`Active`
     222
     223`Description`
     224
     225`Real name`
     226
     227`E-mail address`
     228
     229`Organization`
     230
     231  If you want the name of your organization, school, club or whatever to appear in a header of your message, insert it here.
     232
     233  Example:  Doe Donut Production Ltd.
     234
     235`Mail server (SMTP)`
     236
     237`Signature`
     238
     239=== Compose Mail ===
     240
     241'''''Compose mail settings'''''
     242
     243`Cc: address`
     244
     245`Bcc: address`
     246
     247`Reply-To: address`
     248
     249  Normally this field should remain empty. The default Reply-To address is your e-mail address.  If you want to use a different address, then (AND ONLY THEN!!) you should insert that address here.  Alternatively, you can use the pop-up button to open the address book window, and then drag an entry from there into this field.
     250
     251  Example: jdoe@example.com
     252
     253`Extra headers`
     254
     255  If for some reason you need to add one or more special extra lines to the headers of your mail, you can insert these header lines here. If you would like to insert several lines, separate them by inserting '\n'.
     256
     257  PLEASE DON'T use this feature unless you have enough knowledge of the structure of Internet email.
     258
     259  Example: 'Content-Language: uk\nKeywords: Pattern, YAM, Internet'
     260
     261`URL to own photo`
     262
     263'''''Options'''''
     264
     265`After transfer store mails in 'Sent' folder`
     266
     267`Use alternative 'Sent' folder:`
     268
     269`Quote message when answering`
     270
     271`Put my answer...`
     272
     273`Put my signature...`
     274
     275`Use signature when replying`
     276
     277`Use signature when forwarding`
     278
     279`Add personnal information`
     280
     281`Request a return receipt`
     282
     283=== PGP-Security ===
     284
     285'''''PGP-Security Settings'''''
     286
     287`Use PGP for this identity`
     288
     289`PGP key ID...`
     290
     291`PGP key URL...`
     292
     293'''''options'''''
     294
     295`Sign unencrypted mails per default`
     296
     297`Sign encrypted mails per default`
     298
     299`Encrypt all mails per default`
     300
     301`Add own key when encrypting mails`
     302
     303-----
    204304[[=#FixFilters]]
    205305== Filters ==
     
    219319You can define theoretically an unlimited number of filters. The list on the left shows the names of all the filters defined so far. Click on a name to bring up its details on the right, spread across three sheets -- Options, Comparison and Action. Click on [New] to create a new filter or use [Delete] to delete one. Filters are executed in top-to-bottom order, therefore you should place filters that delete or move messages at the bottom of the list.
    220320
    221 === Options ===
     321=== General ===
    222322`Name`
    223323  The filter's name is merely for recognition and not of any other use.
     
    237337
    238338[[=#FixComparison]]
    239 === Comparison ===
     339=== Conditions ===
     340If (all|one or more|only one)... of the following conditions are met:
     341
    240342`Search in`
    241343  Here you can define what part of the e-mail should be scanned for the search pattern. If you want a field of the message header to be searched, you can choose one from the list which appears when clicking on the cycle gadget, or select 'Other field' and insert the name of the header field into the text field on the right side of the cycle gadget. If 'Message body' is selected, the whole message -except for the headers- will be searched.  Please note that this type of full text search may take quite a long time when big mails are processed (YAM will have to decode mails in MIME format).
     
    276378  //exclusive or// either one or the other of the two criteria must apply, but not both
    277379
     380`Use AmigaDOS patterns`
     381
    278382=== Action ===
    279383
    280 `Bounce`
     384`Redirect`
    281385  Activate this option to have mail matching the search criteria bounced to another recipient -- for instance, you might use this to automatically resend certain email to your mailbox at work.
    282386
     
    308412  If you activate this option, YAM will move any email matching the search pattern to another folder. You can select the folder with the pop-up button.
    309413
     414`Set status to 'Marked'`
     415
     416`Set status to 'Unmarked'`
     417
     418`Set status to 'Read'`
     419
     420`Set status to 'Unread'`
     421
     422`Set status to 'Spam'`
     423
     424`Set status to 'Not spam'`
    310425
    311426`Delete`
    312427  If this option is activated, all messages matching the search pattern will be deleted. (You probably guessed that... ;) )
    313428
    314 
    315429`Don't download`
    316430  If this option is activated, any message matching the search pattern will not be downloaded from the mail server. You can use a remote filter together with this option if several people share the same POP3 account.
    317431
     432`Terminate filter process`
     433
     434-----
    318435[[=#FixSpam]]
    319436== Spam ==
    320437Setup of the spam filter.
    321438
    322 `Activate spam filter`
     439'''''Spam filter'''''
     440
     441`Spam filter enabled`
    323442  Activates the spam filter, believe it or not :)
    324443
    325 `Reset Spam training data`
     444`"Spam" classified mail...`
     445
     446`"Not spam" classified mails...`
     447
     448`Reset training data`
    326449  Resets the Spam training data. Should only be necessary in rare circumstances.
     450
     451`Optimize training data`
     452
     453'''''Spam recognition'''''
    327454
    328455`Check new mail for spam content`
    329456  Automatically checks new mail for spam content.
    330457
    331 `Addressbook whitelisted`
     458`Address book is white list`
    332459  If a mail has an From: address that exist in your addressbook, it will never be considered as spam.
    333460
     
    338465  This option will automatically mark new spam mails as read.
    339466
    340 `Move 'Not Spam' back to 'Incoming'`
     467`Move 'not spam' e-mails back to Incoming folder`
    341468  Will move mails that has been wrongfully detected as spam or mails that have manually been marked as 'Not Spam' back to 'Incoming' folder.
    342469
     
    344471  Applies all your defined filters to mail that is moved back to the 'Incoming' folder.
    345472
     473`Trust header lines of this external filter:`
     474
     475-----
    346476[[=#FixRead]]
    347477== Read ==
    348 Layout options
    349 
    350 === Message header layout ===
    351 `Header`
    352   If 'full' is selected, all the headers will be displayed. Select 'none' if you don't want to see any header. When you switch to 'selected', you can specify yourself which header fields should be visible in the Read window. For specifying the fields you can use any  AmigaDOS pattern. The FROM, TO, DATE and SUBJECT fields are displayed by default. The header layout can also be changed (temporarily) in the Read window itself.
     478Settings related to e-mail reading.
     479
     480'''''Header layout'''''
     481
     482`Headers`
     483  If 'all' is selected, all the headers will be displayed. Select 'none' if you don't want to see any header. When you switch to 'custom', you can specify yourself which header fields should be visible in the Read window. For specifying the fields you can use any  AmigaDOS pattern. The FROM, TO, DATE and SUBJECT fields are displayed by default. The header layout can also be changed (temporarily) in the Read window itself.
    353484
    354485  Example: '(From|Subject|Date|X-Mailer)'
     
    360491  Choose whether to show long headers on one line or to break them on two or more. In the first case, you will need to use the horizontal scrollbar in order to see all the information.
    361492
    362 === Message body layout ===
    363 `Separate sig.`
     493'''''Message body layout'''''
     494
     495`Sig. separator`
    364496  It has become a custom to separate the signature from the text of an e-mail using two dashes and a space. If you don't like this kind of separation, you can define another here. Apart from the setting 'two dashes' you can select between 'separator bar', 'blank line' or even 'no signature' to have no signature at all.
    365497
     
    370502  Select here the color used for the several levels of quoting.
    371503
     504`URL color`
     505
     506'''''Font settings'''''
     507
    372508`Use fixed font`
    373509  It often makes more sense to use a non-proportional font to read messages, since the layout of any tables will be distorted when using proportional fonts. Don't forget to specify the font of your choice in the 'TextEditor' module of YAM's MUI settings, under 'Fonts/fixed'.
    374510
    375 `Display all texts`
    376   If this option is activated and the message contains attachments, not only the actual body of the message will be displayed, but also those attachments themselves, as long as they are of the 'text' type.
    377 
    378 `Text styles`
     511`Show text colors`
     512
     513`Show text styles`
    379514  YAM uses the characters '_', '/', '*' and '#' to indicate underlined, italic, bold and colored text.  For certain special documents, as it is the case with source code, this can make things difficult because some characters are suppressed. So you have the option of switching the rendering of text styles on or off.
    380515
    381 === Other options ===
     516'''''Return receipts'''''
     517
     518`Never send a return receipt`
     519
     520`Allow return receipt for some messages...`
     521
     522'''''Other options'''''
     523
    382524`Multiple windows`
    383525  With this option selected, each message which you choose to read will open its own Read window.
    384526
     527`Search for mails of same thread in all folders`
     528
     529`Delay marking of displayed mail as read for <n> second(s)`
     530
     531`Convert HTML e-mails to plain text`
     532
     533`Map foreign chars to ASCII`
     534
     535`Auto-detect cyrillic charsets`
     536
     537`Display all texts`
     538
     539`Show alternative parts`
     540
     541-----
    385542[[=#FixWrite]]
    386543== Write ==
    387 Headers, stock phrases and editor settings
    388 
    389 === Message Header ===
    390 `Reply to`
    391   Normally this field should remain empty. The default Reply-To address is your e-mail address.  If you want to use a different address, then (AND ONLY THEN!!) you should insert that address here.  Alternatively, you can use the pop-up button to open the address book window, and then drag an entry from there into this field.
    392 
    393   Example: jdoe@example.com
    394 
    395 `Organization`
    396   If you want the name of your organization, school, club or whatever to appear in a header of your message, insert it here.
    397 
    398   Example:  Doe Donut Production Ltd.
    399 
    400 `Extra headers`
    401   If for some reason you need to add one or more special extra lines to the headers of your mail, you can insert these header lines here. If you would like to insert several lines, separate them by inserting '\n'.
    402 
    403   PLEASE DON'T use this feature unless you have enough knowledge of the structure of Internet email.
    404 
    405   Example: 'Content-Language: uk\nKeywords: Pattern, YAM, Internet'
    406 
    407 === Message Body ===
     544Settings related to e-mail composing.
     545
     546'''''Message Body'''''
     547
    408548`Welcome phrase`
    409549  YAM will insert this text at the beginning of every new message you write (except for answers and forwarded messages). You can define a line break by inserting '\n'.
     
    416556  Example: 'Kind regards\n\nJohn Doe'
    417557
     558`Default charset`
     559
     560'''''Editor'''''
     561
     562`Word wrap`
     563  When you save a newly written message, it will be formatted to make sure that no line has more characters than the value specified here. You can also decide whether YAM will insert line breaks as you type or if this should be postponed until you send the message.  In the first case, the internal editor will insert line break codes while you're typing the message.  This way you avoid unwanted surprises when the text is formatted later on saving the message, but on the other hand, any subsequent insertion or deletion of text might be a little less comfortable.
     564
     565  Example: 76
     566
     567`Email cache`
     568  YAM can cache on disk a certain number of the most recent recipients used when writing a new email, if those recipients aren't already in your address book. This may improve the performance of the automatic name completer, especially if your address book is rather brief and you often find yourself having to type your recipient's name and address.
     569
     570  If the hit ratio of the email cache is very low in your everyday use, you might want to turn it off completely by selecting zero mails.
     571
     572`Autosave interval`
     573
     574'''''Font settings'''''
     575
     576`Use fixed font`
     577
     578`Show text colors`
     579
     580`Show text styles`
     581
     582'''''Other options'''''
     583
    418584`Warn when there's an empty subject line`
    419585  Activate this option to let YAM warn you any time you try to send an email with an empty subject line.  This may be the case when sending email to mailing list managers and other automated services, but it is generally considered as bad taste to use an empty subject line when posting to a mailing list.  If you seldom use empty subject lines or you use to forget to fill in this field, you might want to use this option.
    420586
    421 === Editor ===
    422 `Word wrap`
    423   When you save a newly written message, it will be formatted to make sure that no line has more characters than the value specified here. You can also decide whether YAM will insert line breaks as you type or if this should be postponed until you send the message.  In the first case, the internal editor will insert line break codes while you're typing the message.  This way you avoid unwanted surprises when the text is formatted later on saving the message, but on the other hand, any subsequent insertion or deletion of text might be a little less comfortable.
    424 
    425   Example: 76
    426 
    427 `External editor`
    428   If you do not like the internal editor and wish to use another one (thereby forgoing automatic spell checking, text styles and glossary), you can insert its name here.  Remember to insert the full path for the editor, and maybe an appropriate command line option.
    429 
    430   Examples: 'C:Ed'
    431 
    432 `Launch immediately`
     587`Launch external editor immediately`
    433588  Activate this option if you would like the external editor to be launched automatically as soon as you start creating a new message.  By doing so you won't have to click on the [Editor] button in the Write window.
    434589
    435 `Email cache`
    436   YAM can cache on disk a certain number of the most recent recipients used when writing a new email, if those recipients aren't already in your address book. This may improve the performance of the automatic name completer, especially if your address book is rather brief and you often find yourself having to type your recipient's name and address.
    437 
    438   If the hit ratio of the email cache is very low in your everyday use, you might want to turn it off completely by selecting zero mails.
    439 
     590`Check for missing attachments`
     591
     592-----
    440593[[=#FixReplyForward]]
    441594== Reply/Forward ==
    442 Options for quoting messages
    443 
    444 === Forwarding ===
    445 `Initial phrase`
    446   This text will be added at the beginning of the original text of any message you forward.  Click the pop-up button to select from a list of variables which can be inserted (for example %r stands for the name of the recipient, %s stands for the subject, etc.).  When the text is inserted into the message, YAM replaces the variables with their respective values, taken from the forwarded message.
    447 
    448   Example: '*** Forwarded message, originally by %n on %d: ***\n'
    449 
    450 `Terminating phrase`
    451   This text will be inserted at the end of any forwarded message, but before the greetings phrase.  Click the pop-up button to select a variable from the list (for subject, date, sender, etc.).
    452 
    453   Example:  '*** End of forwarded message ***\n'
    454 
    455 === Replying ===
     595Settings related to e-mail replying and forwarding.
     596
     597'''''Replying'''''
     598
    456599`Default reply phrase`
    457600  When you reply to a message, YAM can automatically insert three different phrases in the new message: greetings (Open), an introduction to the quoted message (Intro) and a closing phrase (Close). Use the cycle gadget to select one of these phrases and enter it in the field on the right.  Click the pop-up button to select a variable from the list (for subject, date, sender, etc.).
     
    460603            [Intro]   'On %d, you wrote:\n'
    461604            [Close]   'Kind regards'
    462 
    463605
    464606`Alternative reply phrase`
     
    481623            [Close]   'Kind regards'
    482624
    483 `Quote message using`
    484   The character(s) specified in the editing field plus a space will be put in front of each line of the original message.  Click the pop-up button to select a variable for the sender's initials.
    485 
    486   Example: '%i>'
    487 
    488 `Quote external using`
    489   The character(s) specified in the editing field plus a space will be put in front of each line quoted from an external source, not necessarily related to e-mail.  This is used when inserting or pasting text using the "alternate quoted" method.
    490 
    491   Example: '|'
     625`Verify recipient address`
     626  If this option is enabled, YAM will check if the sender and the return address are the same -- if the "From:" and the "Reply-To:" headers of the message are different, you will be asked to select whom to reply to.  This way it is fairly easy to reply privately to a message from a mailing list.
    492627
    493628`Quote empty lines`
    494629  Usually, the quotation character is inserted at the beginning of empty lines contained in the quoted message.  If for some reason you don't like this, just deactivate this option.
    495630
    496 `Verify recipient address`
    497   If this option is enabled, YAM will check if the sender and the return address are the same -- if the "From:" and the "Reply-To:" headers of the message are different, you will be asked to select whom to reply to.  This way it is fairly easy to reply privately to a message from a mailing list.
    498 
    499631`Strip signature`
    500632  Activate this option to avoid quoting the signature (since you'll delete the signature anyway in most cases).  This option will work only when the signature in the quoted message is separated from the actual message by the standard '-- ' separator, that is, two dashes AND a space.
    501633
     634'''''Forwarding'''''
     635
     636`Forward messages...`
     637
     638`Initial phrase`
     639  This text will be added at the beginning of the original text of any message you forward.  Click the pop-up button to select from a list of variables which can be inserted (for example %r stands for the name of the recipient, %s stands for the subject, etc.).  When the text is inserted into the message, YAM replaces the variables with their respective values, taken from the forwarded message.
     640
     641  Example: '*** Forwarded message, originally by %n on %d: ***\n'
     642
     643`Terminating phrase`
     644  This text will be inserted at the end of any forwarded message, but before the greetings phrase.  Click the pop-up button to select a variable from the list (for subject, date, sender, etc.).
     645
     646  Example:  '*** End of forwarded message ***\n'
     647
     648-----
    502649[=#FixSign]
    503650== Signature ==
    504651You can define and use one standard and upto two alternative signatures within YAM (e.g. one signature for private email and another one for business). Clicking on the cycle button in the upper left corner of the window you can display and edit the signatures in the small text editor window below.
    505652
    506 `Use signature`
     653'''''Signature'''''
     654
     655`Active`
    507656  If this option is activated, a signature will be inserted at the end of each message you write.
    508657
     658`description`
     659
     660`Signature text`
    509661
    510662`Edit in external editor`
     
    517669  Click this button to insert the variable '%e' at the current cursor position in the editor.  YAM will replace this variable with the contents of the 'SIGNATURE' environment variable while creating a new message.  This way it is possible to have random values automatically inserted into the signature, like the date, the actual temperature, the time, your weight or whatever...
    518670
     671`Append a file as signature instead`
     672
     673'''''Taglines'''''
     674
    519675`Tagline file`
    520676  The tagline database contains taglines, little poems or other very important and witty pieces of wisdom which can be selected randomly and be inserted into the signature. There are collections of thousands of these taglines on Aminet.
     
    528684
    529685[=#FixLists]
    530 == Lists ==
    531 Columns, sizes, time unit, context menus
    532 
    533 === Field settings ===
    534 `Folder list, Message list`
    535   Select the items you want to see in these lists.
    536 
    537   As of YAM 2.4, you can also have a context menu for both the folder and message lists.
    538 
    539 === General settings ===
    540 `Use fixed font`
    541   It often makes more sense to use a non-proportional font since the display might become distorted with proportional fonts. Don't forget to specify the font of your choice in the 'TextEditor' module of YAM's MUI settings, under 'Fonts/fixed'.
    542 
    543 `Time in Swatch Beats`
    544   Enable this option to display the time in Swatch Beats instead of the hours:minutes format.  This revolutionary unit of time, invented by Swatch, a Swiss watch manufacturer, divides the day in 1000 beats and abolishes the different time zones.  The meridian is Biel, a town located in Switzerland.
    545 
    546 `Size format`
    547   This setting allows you to select the exact format of the sizes given in the message and folder lists, as well as the preselection window.
    548 
    549 === Status bar ===
    550 `Position`
    551   Allows you to select the position of the status bar, or even disable it completely.
    552 
    553   Example: Top
    554 
    555 `Label`
    556   The contents of the status bar.  Use the pop-up button at the right to select a variable for new, unread, etc. messages.
    557 
    558   Example: '- Total: %t New: %n Unread: %u'
    559 
     686
     687-----
    560688[[=#FixSecurity]]
    561689== Security ==
    562 Encrypting mails with PGP
    563 
    564 === PGP ===
     690Configure security related settings.
     691
     692'''''PGP (Pretty Good Privacy)'''''
     693
    565694`PGP's directory`
    566695  The famous (some people and authorities might even say notorious) programme PGP (Pretty Good Privacy) by Philip Zimmermann is used for encrypting, decrypting and digitally 'signing' messages. Please install PGP as described in PGP's manual and insert the full directory path of the PGP executable here. YAM recognizes automatically if you're using version 2.6 or 5.x.
     
    568697  Example: 'Work:Programs/PGP/bin/'
    569698
    570 `Your PGP key ID`
    571   If you want to sign messages with PGP, YAM needs the shortcut of your secret PGP key.  Click on the pop-up button and select your key. If YAM cannot find your PGP key, then either PGP is not installed correctly on your system, or you've specified the wrong path for the PGP executable.
    572 
    573   Example: 0x70804A7B
    574 
    575 `Encrypt to self`
    576   Encrypting messages for a certain recipient has one disadvantage: you cannot read or edit the message any more after encryption. Activate this option to be able to read the message after encryption. YAM will enable you to do so by simply encrypting the mail using the recipient's key as well as your own.
     699`Remember passphrase for <n> idle minute(s)`
    577700
    578701[[=#FixLogfiles]]
    579 === Log files ===
    580 `Log file path`
     702'''''Log files'''''
     703
     704`Mode`
     705
     706  If you are not interested in having log files at all, select 'none'.  Select 'normal' to have only the important events like receiving/sending mail recorded.  In 'verbose' mode, YAM will log every transferred e-mail in detail.
     707
     708`Path`
     709
    581710  YAM will save the log files to the path specified here. The format of log files is explained in the  Reference  chapter.
    582711
    583712`Split log file`
     713
    584714  Switch this option on if you want YAM to create a new log file each month.  To distinguish the different files that will be created, YAM includes the date in the log file name, e.g. YAM-Jan98.log. If you'd like one big single log file, just leave this option deactivated.
    585715
    586 `Mode`
    587   If you are not interested in having log files at all, select 'none'.  Select 'normal' to have only the important events like receiving/sending mail recorded.  In 'verbose' mode, YAM will log every transferred e-mail in detail.
    588 
    589716`Log all events`
     717
    590718  Deactivate this option if you're only interested in logging events having to do with the mail transfer (sending/receiving).
    591719
     720-----
    592721[[=#FixStartQuit]]
    593722== Start/Quit ==
    594723Options for actions at start up and termination
    595724
    596 === On program startup ===
     725'''''On program startup'''''
     726
    597727`Load all folders`
    598728  If you have many voluminous archive folders, you can increase YAM's starting speed by deactivating this option. Furthermore, deactivating this option will save memory, because only the index files of the system folders will be loaded on startup -- the index files of the user-defined folders will be loaded only when they are needed.
     
    613743  If this option is activated, YAM will search the Outgoing folder for messages to send on startup and ask you if you'd like to send them.  Please note that this will work only if a TCP/IP stack has been loaded previously.  You can temporarily stop YAM from doing so by starting YAM from a shell with the NOCHECK switch.
    614744
    615 `Download new mail`
    616   If this option is activated (and there's already a TCP/IP stack running on your system), YAM will check the mail server for new messages on startup.  You can temporarily stop YAM from doing so by starting YAM from a shell with the NOCHECK switch.
    617 
    618 === On program termination ===
     745'''''On program termination'''''
     746
    619747`Send mail in outgoing queue`
    620748  Activate this option to make YAM look for ready to send messages in the Outgoing folder before actually ending the program.  If it's activated, YAM will ask you if you'd like to send those messages before quitting.  (Of course it will do so only if there are actually any messages in the Outgoing folder.)
     
    626754  Switch this on to make YAM empty the 'Deleted' folder when closing down.
    627755
     756`Save user interface layout`
     757
     758-----
    628759[[=#FixMime]]
    629760== MIME ==
    630761Configure MIME viewers for attachments.
    631762
    632 === MIME viewers ===
     763=== MIME type ===
    633764The program selected by default to display attachments is MultiView. Messages in  MIME format  contain a field called Content-Type in which the type of the encoded file is specified.  You can define a different program to process every single type of file.  This is important for users who do not want to use MultiView for processing images and sound files, or for processing file types not yet supported by datatypes. Click New to configure a display program, or use Delete to delete an entry.
    634765 
    635766In addition, new file types defined here are also taken into account when composing a new message.  For instance, if a new attachment type "application/pgs" is defined for filenames ending in ".pgs", YAM will automatically use this MIME type when attaching files that bear this extension.
    636767
    637 `Attachment type`
     768'''''Options'''''
     769
     770`MIME type`
    638771  This is the type of the actual entry, and corresponds to the Content-Type field contained in the message.  You can select one from the pop-up list or use AmigaDOS wildcards, e.g. 'image/#?' to use the programme for a whole class of file types.
    639772
    640773  Example: 'image/jpeg'
    641774
    642 `Extension`
     775`File extensions`
    643776  Filename extension for the file type.  This extension allows YAM to assign the correct "Content-Type:" field for a file.
    644777
    645778  Example: 'jpg jpeg jfif'
     779
     780`Description`
    646781
    647782`Viewer`
     
    650785  Example: 'TOOLS:Gfx/ViewJPG "%s"'
    651786
     787`Display charset`
     788
     789'''''Default'''''
     790
    652791`Default viewer`
    653792  This viewer will be used if the attachment doesn't match any of the user defined types (see above).
     
    655794  Example: 'SYS:Utilities/MultiView "%s" SCREEN'
    656795
    657 `Identify binary attachments`
    658   Some mail clients always use application/octet-stream as the "Content-Type:" field for binary attachments.  To still show such attachments with the correct program, YAM can search the viewer list based on the file name extension of the attached file (see Extension above).
    659 
    660 === Paths ===
    661 
    662 `Decode files to`
    663   This is the pre-selected directory to decode attachments into.
    664 
    665   Example: Work:Data/In
    666 
    667 
    668 `Attach files from`
    669   Whenever you want to attach a file to a new message, YAM will look for it at this position first.
    670 
    671   Example: Work:Data/Out
    672 
     796`Display charset`
     797
     798-----
    673799[[=#FixAddressbook]]
    674800== Address book ==
    675 Visible columns, personal data exchange
    676 
    677 === Colums ===
     801Configure address book related options.
     802
     803'''''Colums'''''
     804
    678805Select the items you want to see in the address book.
    679806
    680 === Personal data exchange ===
    681 `Add personal info`
    682   Check this option to create special message headers containing personal data like your postal address, phone number, homepage, date of birth or URL of your picture.  If the recipient works with YAM too, (s)he will able to create an address book entry and fill it with your data.  To get this working, add an entry to your address book containing your data (YAM will find your entry based on the e-mail address).
     807'''''Personal data exchange'''''
    683808
    684809`Save sender's address`
     
    701826  Example:  PROGDIR:Gallery
    702827
    703 `URL of your picture`
    704   If one exists, enter here the WWW address (URL) of a small photo of yourself.  The URL will be listed along with the headers of every outgoing message if 'Add personal info' is enabled.
    705 
    706   Example: 'http://yam.ch/gallery/BECK_Marcel.gif'
    707 
    708828`HTTP Proxy server`
    709829  If you're behind a firewall and only get into the Internet using a proxy server, then you have to enter here the address of that proxy server, otherwise it won't be possible to download photos or get information about new versions of YAM.
     
    711831  Example: proxy.example.com:8080
    712832
     833-----
    713834[[=#FixScripts]]
    714835== Scripts ==
     
    729850  Switch this option off if you want the script to run in the background, which means you don't want to wait for it to finish before YAM can go ahead with other tasks.
    730851
     852-----
    731853[[=#FixMisc]]
    732854== Miscellaneous ==
    733855Paths, AppIcon, save/delete, tracking & packing
    734856
    735 === Paths ===
    736 `Directory for temp files`
     857'''''Paths'''''
     858
     859`For temporary files`
    737860  YAM needs this directory to save some files needed while processing e.g. messages with MIME attachments.  If you are short on memory (2 MB or less), you better choose a path on your hard disk to avoid possible problems with very large messages.
    738861
    739862  Example: 'T:'
    740863
    741 === Mailbox status AppIcon ===
     864`Decode files to`
     865
     866`Attach files from`
     867
     868`Download path`
     869
     870'''''External editor settings'''''
     871
     872`External editor`
     873
     874`Display charset`
     875
     876'''''Mailbox status'''''
     877
     878`AppIcon on Workbench`
     879
     880`Label`
     881  The label for the AppIcon which will be displayed while YAM is running can be specified here.  Click the pop-up button to select a variable for new, unread, etc. messages.
    742882
    743883`Position X/Y`
     
    746886  Example: 'X:550  Y:144'
    747887
    748 `Label`
    749   The label for the AppIcon which will be displayed while YAM is running can be specified here.  Click the pop-up button to select a variable for new, unread, etc. messages.
     888`Enable 'docky' icon`
     889Is Enable 'docky' icon outdated? Cannot see in misc screen.
    750890
    751891`Close gadget iconifies program`
    752892  Following the MUI default behavior, the close gadget (or the <Esc> key) will terminate the program.  Activate this option to let them iconify YAM instead.
    753893
    754 === Save/delete messages ===
    755 
    756 `Confirm deletion of [xx] or more messages`
     894'''''Save/delete messages'''''
     895
     896`Confirm deletion of <n> or more messages`
    757897  If this option is activated, a security requester will appear before deleting a certain number of messages.  This makes sense especially when a number of two or more is selected.
    758898
     
    760900  If this option is switched on, messages won't be moved to the 'Deleted' folder on deletion -- instead, they will be erased immediately from the hard disk.  This saves some time and memory, but on the other hand you won't be able to retrieve any message deleted by mistake.
    761901
    762 `Save sent messages`
    763   Activate this option to make YAM save sent messages into the 'Sent' folder.  You can select this as well specifically for any single mail, by using the relevant option in the  Write  window.
    764 
    765 === Message tracking ===
    766 
    767 Here you can define how YAM should react if a message's sender has requested a disposition notification (MDN) while writing his/her message.
    768 
    769  //Ignore//   - The request will be ignored completely and there won't be any report.
    770  //Autodeny// - The sender will be informed that you don't wish to send a disposition notification for the message.
    771  //Accept//   - The sender will be informed as requested about the message's disposition.
    772  //Ask user// - You can decide in each case if you want to ignore, deny or accept the request.
    773 
    774   Additionally, YAM's reaction can be related to the event activating the disposition notification:
    775 
    776  //Display//  - The message was read or answered
    777  //Process//  - The message was bounced or forwarded without reading
    778  //Delete//   - The message was deleted without reading
    779  //Filter//   - The message was automatically processed or deleted by a filter
    780 
    781 `Send at once`
    782   The condition report will be sent immediately if there's a TCP/IP stack running, otherwise it will be saved to the 'Outgoing' folder.
    783 
    784 === XPK/LhA settings ===
     902'''''XPK/LhA settings'''''
    785903
    786904`Packer`
     
    799917  Example: 'LhA -a -m -i%l a %a'
    800918
    801 [[=#FixLook]
     919`Show progress`
     920
     921'''''Connections'''''
     922
     923`Transfer window`
     924
     925-----
     926[[=#FixLook]]
    802927== Look & Feel ==
    803928Here YAM will display a list with available themes and a small preview of what it will look like.
    804929
     930=== Theme ===
     931
    805932`Activate`
    806933  Activates the selected theme, which requires you to save the configuration and restart YAM, in order to see the new icons.
    807934
    808 `Status bar`
     935=== Main window ===
     936
     937'''''Column settings'''''
     938
     939[[=#FixLookFolderList]]
     940  ''Folder list''
     941
     942  `Folder name`
     943
     944  `Total`
     945
     946  `Unread`
     947
     948  `New`
     949
     950  `Size`
     951
     952  `Context menu`
     953
     954[[=#FixLookMessageList]]
     955  ''Message list''
     956
     957  `Status`
     958
     959  `Sender/recipient`
     960
     961  `Return address`
     962
     963  `Subject`
     964
     965  `Message date`
     966
     967  `Size`
     968
     969  `Filename`
     970
     971  `Date Sent/Received`
     972
     973  `Mail account`
     974
     975  `Context menu`
     976
     977'''''Status bar'''''
     978
     979`Position`
    809980  Will show a status bar at either - top, middle, bottom or don't show any at all.
    810981
     
    812983  Here you can select what the status bar should show. There are a number of different options to select from.
    813984
     985'''''Quick search bar'''''
     986
     987`Position`
     988
     989'''''General settings'''''
     990
    814991`Size format`
    815992  Here you can select how YAM will display sizes for mails and mail drawers.
    816993
    817 `Embedded read pane in main window`
     994`Show embedded read pane in main window`
    818995  Shows an embedded read pane in the main window, which allows you to read mails directly in the main window instead of double-clicking a mail to open it in a separate read window.
    819996
    820 `Show quick search in main window`
    821   Shows a quick search field in the main window, for quick searches :)
    822 
     997`Use fixed font`
     998
     999`Show time in Swatch Beats`
     1000
     1001`Relative date output`
     1002
     1003`Address book lookup in message list`
     1004
     1005`Double click on folder opens folder settings`
     1006
     1007-----
    8231008== Updates ==
    8241009Update settings
    8251010
     1011'''''Update check'''''
     1012
    8261013`Check for updates`
    8271014  Allows you to select the interval at which YAM will check for updates to itself and other third party software, which YAM needs. A button next to it, allows you to do manual checks for updates at will.
     
    8291016  Below you can also see when exactly the last check was done.
    8301017
     1018-----
     1019-----
    8311020= Hidden Configuration =
    8321021
     
    8431032  Example: 'WriteIndexes = 30'
    8441033
    845 `AutoSave`
     1034`AutoSave` ---> Outdated?
    8461035  While you're writing a message, YAM saves the contents of the editor every ten minutes as .autosave0.txt or .autosave1.txt in the program directory.  After a crash you can load this file using "Text/Insert".  The AutoSave parameter contains the time interval between two backups, in seconds.
    8471036
    8481037  Example: 'AutoSave = 600'
     1038
     1039`ExpungeIndexes`
    8491040
    8501041`SupportSite`
     
    8531044  Example: 'SupportSite = http://yam.ch/'
    8541045
    855 `JumpToNewMsg`
     1046`JumpToNewMsg` ---> Outdated?
    8561047  If this option is set to 'Y', YAM will jump to the first new or unread message whenever you select a folder.
    8571048
     
    8951086  Example: 'HideGUIElements = 3'
    8961087
    897 `LocalCharset`
     1088`LocalCharset` ---> Outdated?
    8981089  This is the ISO name of the character set you're using on your computer.  The default iso-8859-1 (Latin-1) works for Western Europe and English speaking countries.  Polish and Russian users probably have to adjust this option.
    8991090
    9001091  Example: 'LocalCharset = iso-8859-2'
     1092
     1093`SysCharsetCheck`
     1094
     1095`AmiSSLCheck`
    9011096
    9021097`StackSize`
     
    9041099
    9051100  Example: 'StackSize = 40000'
     1101
     1102`PrintMethod`
     1103
     1104`AutoColumnResize`
     1105
     1106`SocketOptions`
     1107
     1108`SocketTimeout`
     1109
     1110`TRBufferSize`
     1111
     1112`EmbeddedMailDelay`
     1113
     1114`KeepAliveInterval`
     1115
     1116`StyleFGroupUnread`
     1117
     1118`StyleFGroupRead`
     1119
     1120`StyleFolderUnread`
     1121
     1122`StyleFolderRead`
     1123
     1124`StyleFolderNew`
     1125
     1126`StyleMailUnread`
     1127
     1128`StyleMailRead`
     1129
     1130`AutoClip`
     1131
     1132`ShowFilterStats`
     1133
     1134`ConfirmRemoveAttachments`
     1135
     1136`BirthdayCheckTime`
     1137
     1138`DefaultSSLCiphers`
     1139
     1140`MachineFQDN`
    9061141
    9071142`OverrideFromAddress`